Based on 0 reviews
Unlock support for iPhone 4 /4S/5/5S/5C/IPAD/ MAC BOOK
support for Samsung Android based Phones 4.3+ Version
Support for HTC Android based Phones 4.3+ Version
Package include :
MFC dongle – the main PCB that contains the core IC
Light sensor – a TEMT6000 light sensor
Cable for light sensor to be used to connect the light sensor to MFC dongle
2 red cables to be used when force update will be necessary
Lightning OTG (for apple products)
Micro USB OTG (for android products and other products with micro USB – including phones
With USB 3 like Samsung Galaxy S5)
for Apple OTG (for older apple products)
USB to USB adaptor that we recommend that you use every time to prevent the damage of MFC dongle if used to many times, also on some computers the MFC dongle is not correctly recognized if inserted into a USB 3 port or because the case of the computer does not allow MFC dongle to be correctly inserted
How to install the software & first update ?
Install Dongle Drivers from DongleDrivers directory by running InstallDriver.exe This will install mfc120.dll required for the program to start.
Install vcredist_x86 for 32 bits windows or vcredist_x64 for 64 bits windows from MicrosoftRedistributables directory
To install the dongle update driver you need to connect MFC dongle to computer in BOOT MODE (you can open notepad.exe first so all the oputput from MFC dongle will be written there). This will install libusb0.dll driver required for the program to start. In order to connect MFC dongle in BOOT MODE you need to connect GND pin P0(P zero) pin together using the RED cable we provided in the pack.
<img src=”http://g03.s.alicdn.com/kf/HTB1nV9BGVXXXXb1XFXXq6xXFXXXN/200130032/HTB1nV9BGVXXXXb1XFXXq6xXFXXXN.jpg” alt=”New Unlock dongle of MFC Dongle for Iphone and Samsung and HTC Screen lock .Unlock screen lock” ori-width=”477″ ori-height=”508″>
Disconnect MFC dongle.
Open the software and select the appropriate update and thick update.
Connect the MFC dongle again to computer and wait until update finishes. If programm stops at [warn] > waiting for reconnect … then you can take out the MFC dongle and connect again to computer.
Now you can write the settings if you did not do that at previous steps.